We have all found ourselves with a flat battery and in this day when most cars are automatics, the rolling start just doesn’t work.
So what is the best way to jump start a car or 4WD with a flat battery. 4WD’s especially are difficult and the cranking amps required to start, means you probably need another 4WD. But is that the best way?
Beware the risks of jump starting
If you find yourself with a flat battery, you may be tempted to jump start your car from another vehicle, using jump leads, or from a battery booster pack.
But while this may get you going again, did you know that jump starting can damage your vehicle’s sensitive electronics, leading to expensive repairs, as well as causing lasting damage to your battery?
Today’s modern vehicles have more than 200 mini computers or ECUs (electronic control units) performing a range of tasks from engine management to controlling air conditioning, lights and parking sensors. These computer systems have a sensitive level of around 16 volts, but jump starting the lead acid battery on your car causes a surge of power of up to 20 volts – rather like hitting your car’s electrical system with a lightning bolt – and this sudden spike in voltage can quite easily blow one of these ECUs. And with replacement ECUs costing hundreds or even thousands of dollars, this is a risk you really don’t want to be taking!
What happens when you jump start a car?
When you jump start a car, the battery booster pack – or, if you are using jump leads, the battery on the connected vehicle – acts as a power reservoir to get the engine started, temporarily bypassing the drained battery. Then, once the engine is running and you disconnect the booster pack or jump leads, the alternator suddenly sees an empty battery and instantly reacts by opening the floodgates to refill it. This massive rise in current creates a spike in voltage, and this is what can cause the damage.
Jump starting a car can damage your battery too, as the alternator is pumping in current at a higher rate than the battery can handle. This causes the battery to heat up, bending the battery plates, leading to the shedding of active material (lead dioxide) and causing a build up of debris in the bottom of the battery. This damage will reduce the efficiency of your battery and dramatically reduce its lifespan, making earlier replacement necessary.
Safe starting
The safest way to get your car started if you find yourself with a flat battery is to use a device that assess the health of the battery and then intelligently applies a gradual charge. For example, CTEK’s fully portable CS FREE uses patented adaptive boost technology to get you going again in around 15 minutes.
A device like the CS FREE is completely safe for your vehicle’s electronics, because it gently refills the battery with charge and will let you know when it’s safe to start the car. Then, when the device is disconnected, the battery is already half full, so the alternator only raises charge slightly, and within safe limits, to top up the battery.
The CTEK CS FREE is actually four great products in one portable unit. As well as being an adaptive booster, CS FREE also works as a battery charger, a smart maintainer and high tech power bank. And if you use the CS FREE to maintenance charge your battery on a regular basis, you can actually extend battery life by up to three times.
You can find more information about the CS FREE, which is compatible with all types of 12V lead-acid battery as well as lithium (12V LiFePO4) batteries at https://www.ctek.com.